Here are some of the math operations in the post-processing:
| # | Operation | What it produces | Typical examples |
|---|---|---|---|
| 1 | Differentiation (derived fields) | Gradients of the primary unknown, evaluated at Gauss points | Strain and stress from displacement, heat flux from temperature, E-field from potential |
| 2 | Recovery / smoothing | Continuous nodal fields from discontinuous element values | Gauss-point-to-node extrapolation, nodal averaging, superconvergent patch recovery |
| 3 | Numerical integration | Global scalars over a volume or surface | Energy, power loss, total force, flux through a surface, acoustic power, error norms |
| 4 | Reduction / statistics | One number from a field | Max, min, mean, RMS, sum of nodal reaction forces |
| 5 | Interpolation / sampling | Values where no node exists | Point probes, line profiles, cut planes, mapping to another mesh |
| 6 | Algebraic transformation | Engineering measures from tensors or complex values | Von Mises and principal stresses, coordinate rotation, amplitude and phase |
| 7 | Time / frequency processing | Signal quantities | FFT, time averaging, transfer functions, sound pressure level |
| 8 | Error estimation / verification | Evidence the result is trustworthy | Error against an analytical solution, mesh convergence, energy or flux balance |